Snacksticks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Knuckle Chopsticks for snacking while gaming or coding. Inspired by snactiv, known from shark tank US.
- Ocena
- 4,842 / 5
- Polubienia
- 162
- Pobrania
- 977
- Wydruki
- 18
- Wyświetlenia
- 3122
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
You like to eat snacks while gaming or coding, but you are annoyed about getting a filthy keyboard, mouse or gamepad? Then this little tool will help to keep your hands clean.
Yes it’s not a new idea … originally it’s inspired by snactiv, known from the tv series shark tank US and there are already some other 3D models to find, but I was not totally satisfied with their design, so I decided to design my own version.
It’s easy to print, no need for supports. For best durability you should print it with 100% infill or like I did it with 12 walls.
I used a layer height of 0.15 for a smooth surface, but I think 0.2 should also be ok.
As you will use it for direct contact with food, it is recommended to use a food-safe petg filament and a sealing surface coating, like food-grade epoxy resin. Please also take a look on prusas blog article about „How to make food-grade 3D printed models“:
https://blog.prusa3d.com/how-to-make-food-grade-3d-printed-models_40666/