RunCam 5 GoPro Mount Case v1.4

This is inspired by SSCraft's Runcam 5 GoPro Mount Frame on thingiverse: https://www.thingiverse.com/thing:3884268

Also, this model by SkyCamOne was used for visualization of the design: https://www.thingiverse.com/thing:3723863

This is my continued evolution of having a secure, minimalist mount for the RunCam 5 Orange 4k action camera. 

Use a single M2x10 socket-cap screw to secure the rear plate to the frame. The M2x8 will work (there's a spare in the Prusa spare screws bag) but only ½ the threads will be in the case, the hole is for a M2x10.

Please let me know if there's issues with the model. 

Post-beta revisions thus far:

v.1: Artifacts in model interior after using a blank of the camera body to “cut” the hole. Poor rear-plate interface.

v.1.1: Forgot to take the top-rear of the main case off, no way for the plate to slide in.

v.1.2: Completed model without artifacts (mostly) inside main case. Fit is snug, takes some work to get in/out. This type of fit would not need the rear plate. First test print. 

v.1.2b: Forgot to cut one side of rear plate for groove in main case. Enlarged opening for lens as it didn't look right with the actual camera in it. 2nd print of rear plate.

v.1.2c: Cut the corners of the lower part of the rear plate because it was bottoming out before fully seated. Despite setting parts as transparent, that one part has been super frustrating in the limited tools I know how to use right now. 3rd print of rear plate.

v.1.2d: Forgot to cut the rear plate floor height to the interior floor, so it wouldn't seat fully. 

v.1.3: Fixed case rear plate cutout, cleaned up rear plate. Pictures of my make are with v.1.2 of the case and v1.3 rear plate.

v1.4: Fine tuning the rear plate fitment. I really need to learn how to use Fusion 360 or something better than Tinkercad.