Prusa Mini Inboard Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting Bracket sits inside of the T frame of the Prusa Mini so you can easily mount it.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed off two of these brackets to mount my 3d printer to a sliding drawer in my server rack. The Prusa mini is built out of 30 series 80/20 style T slot framing material. You need the right size 80/20 BHSCS & Znut to mount it to the printer. Then I was able to use a 10/32x1/2" fastener and nuts to bolt it down to the shelf. #10 washers barely fit, had to squeeze them in a bit.
I ended up having to take the front plate off of the entire printer so I could just slide the znuts in. It's not worth the time trying to drop the znuts in just right.
I built the bracket this way so you can slide it up and down on the inner frame of the printer, giving you more play when you are trying to mount it.