Dremel adapter for Graber i3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this attachment so I can "MIL" using a Dremel tool and my Graber i3. Uses the same 2 screws as the extruder.…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I made this attachment so I can "MIL" using a Dremel tool and my Graber i3.
Uses the same 2 screws as the extruder.
The square slots are for using zip ties to fix the body of the dremel to the mount.
The "Dremel" used was a generic one sold on supermarkets branded as Walmart/Carrefour brand, just unscrew the flange at the end.
Print Settings
Printer:
Graber i3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20% Zig Zag
Filament:
Generic ABS
Black
Notes:
ABS or PETG is recommended.
Enable "Extra wall" so the infill connects to the wall.If have to use PLA print more than 5 perimeters for extra strength.
Custom Section
Category: 3D Printer Accessories