CR-10 Standalone Remix and CAD file
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really like the build from Cornely_Cool and the instruction from Mellowj to build my own CR-10 standalone. I re-draw…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 1056
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I really like the build from Cornely_Cool and the instruction from Mellowj to build my own CR-10 standalone.
I re-draw some of the panels in OnShape and feel free to modify them.
Additional improvements also include the BTT TFT35-E3 mount. PiTFT50 screen mount.
I also redesign the clamp insert which will hold tighter.
I adjust the side panel tabs because the original version is too tight to insert into the 2020 t-slot.
I plan to add a gas spring to lift the printer when servicing the electronics.
Please refer to Cornely_Cool and Mellowj 's post for the assemble instruction
Category: 3D Printing