Washer stamping jig (printer friendly)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A "blockmit"-inspired washer stamping jig. Printer-friendly design.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 869
- Wydruki
- 3
- Wyświetlenia
- 3735
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
A jig for stamping your bitcoin mnemonic on DIN9021 M8 washers with 24mm outer diameter.
Because of endless warping issues with the original “blockmit” V3 jig design, I made a new, more printer friendly design.
Adjust for your stamps and washer size by scaling and adjusting the hole expansion, if necessary. This model fits 6mm x 6mm stamps with some extra tolerance (mine are more like 6.4 mm x 6.4mm) and has quite tight tolerances for the jig insert. Best printed with low speed for enhanced accuracy.
Use some double-sided adhesive tape on a steel block or anvil to fix the position of the washer and the jig on the block, then begin stamping.
Have fun!