Adafruit PyGamer Case with soft buttons and port openings.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modified the original adafruit PyGamer case to suit my needs. Added openings at the top and bottom to allow access…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I modified the original adafruit PyGamer case to suit my needs. Added openings at the top and bottom to allow access to the ports at the bottom as well as a hole to route a stemma cable through the back. Also added a loop to attach a keychain/carabiner/lanyard.
Was not a fan of how the hard buttons felt so I make some new button covers in TPU that can be attached to the SMD button with the tinies amount of superglue around the inside edge. They feel soooo much better and can easily be pressed through the soft material.
Printed case in PLA at 2.5mm with no supports.
Due to their tiny size, buttons print best upside down in 0.1mm, TPU, no supports.
You'll also want to print the snap fit bezel from here. https://www.thingiverse.com/thing:4621481
Category: Electronics