1 / 1
Bambu Lab X1 - top glass lid cover riser holder shim air vent — zdjęcie 1

Bambu Lab X1 - top glass lid cover riser holder shim air vent

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Creates uniform air gap for heat to escape when printing with PLA, holding the existing glass lid level.

Ocena
4,91 / 5
Polubienia
449
Pobrania
3935
Wydruki
78
Wyświetlenia
22 232
Oceny
67

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Mirror both parts for a set of four.

Print out of ASA or other material that will resist higher temperatures as needed.

Can be easily modified by updating variables in onshape model.

leg_length_a 60 (min: 20mm more contact area on glass reduces chances of cracking)
leg_length_b 120 (min: 20mm more contact area on glass reduces chances of cracking)
height 15 (min: 5mm)
radius 25 (min: R0.5 for front corners, R25 for back corners)


Now also available directly for printing from makerworld

Tagi