Recliner Arm Rest Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder sits between the side of a recliner and an arm rest storage area to hold items like controllers or laptops.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
Recliner Arm Rest Holder
This adapter is designed to fit between the side of a recliner and the under-the-armrest storage compartment. It's built to hold items such as video came controllers to laptops (see the photos for examples).
Key Dimensions
- Expected distance from side of recliner to inner wall of the under-the-armrest storage compartment: 56.896 mm
- Holder compartment: 84.00 mm width by 174.546 mm length by 70.50 mm height
Printing Advice
I printed this with the 0.20 mm layer height Speed preset. I think that the thicker wall width provides sufficient strength and rigidity for holding heavier items like laptops so I think the setting is fine.
If you use this for a dark room I suggest glow-in-the-dark filament (though be aware that these filaments tend to wear nozzles faster as they contain abrasive materials that give it the glow-in-the-dark property) for these parts because that can help illuminate items and make it easier to find them. I printed the part shown in the photos with two different glow-in-the-dark PLA brands (Overture and iSANMATE) due to low filament in one reel which is why you can see a color variation.