PTFE Tube Connector with PC4-01 PC4-M10 Fitting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To make multicolored vases, you don't need to weld filament. Just put pieces of different colors into your PTFE tube.…
- Ocena
- 5 / 5
- Polubienia
- 68
- Pobrania
- 569
- Wydruki
- 9
- Wyświetlenia
- 1980
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
To make multicolored vases, you don't need to weld filament. Just put pieces of different colors into your PTFE tube. As there is a chance of them becoming stuck (ask me how long it takes to get ~40 pieces of filament unstuck in a 150mm tube) it is well advised to have a way to separate the tube.
This part has a M10 thread and is 4mm on the inside. Just use the "default" PC4-01 / PC4M10 fittings, put your tube parts in there and you have a nice smooth connection for your filament to travel through.
Threads made in OpenSCAD with "Nut Job" https://www.thingiverse.com/thing:193647
Edited in Blender
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
PLA
Notes:
Warning: Using this model for anything other than making multicolor vases is forbidden by law in over 70 countries worldwide and can result in confiscation of your printer.
Category: 3D Printer Accessories