1 / 5
Vive Controller Flexible Jacket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A protective jacket for HTC Vive controllers. If you've heard of the Mamut on kickstarter, this is basically the same…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A protective jacket for HTC Vive controllers. If you've heard of the Mamut on kickstarter, this is basically the same thing. Designed for flexible filament such as TPU.
Warning: This is a difficult print
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
Yes
Resolution:
0.3mm
Infill:
20%
Notes:
Printed in TPU
Post-Printing
- When removing support material from the side lobes, needle nose pliers are required.
- My prints had heavy stringing. I cut off as much as I could with scissors and burned off the rest with a lighter.
- My prints delaminated at the thinnest points under the side lobes. To fix this, I tried gluing one with epoxy, and on the other I melted the layers back together with the tip of a 3D pen. Both techniques worked.
Category: Video Games