Vive Modular Gun Controller with Height Adjustable Stock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update This Thing is obsolete, see my improved design here:https://www.thingiverse.com/thing:2905300 This gun…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 717
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update
This Thing is obsolete, see my improved design here: https://www.thingiverse.com/thing:2905300
This gun controller for the HTC Vive has the following features:
- Proportions based on the M16, designed for H3VR.
- Height adjustable stock with 95mm of travel.
- 3 possible configurations: Rifle, Stockless, and Stocked Pistol.
- Attach and detach to the controller in seconds.
- No fasteners required, glue optional.
- Minimal obscuration of the infrared sensors.
The longest part is 200mm.
Note: The stock flexes a bit, unfortunately. I printed mine in PLA, other plastics may flex more.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
No
Supports:
Yes
Resolution:
0.35mm
Infill:
10%
Notes:
Print the set screw with 0.1mm layer height. Print the set screw and the stock lower part without support material.
Post-Printing
The "stock lower" and "stock clip" parts go together tightly, you may need to use a mallet. You can glue them together if you want.
Category: Video Games