30mm scope mounts - 9-11mm dovetail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Couldn't find a design to fit a 30mm scope to a 9-11mm dovetail rail, so made one. This seems to work fine for holding…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 911
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Couldn't find a design to fit a 30mm scope to a 9-11mm dovetail rail, so made one. This seems to work fine for holding an old Gamo red dot scope to an HW40.
Two sizes included - normal and thin. I recommend the normal size. I printed both to test. The normal size is better.
Normal uses 4 nuts and bolts per ring, thin uses 2 per ring.
Normal is 24mm, thin is 11mm.
Print flat side down.
In the filenames, left = the bolt head side, right = the nut side.
Extra parts needed:
M5x25mm bolts (or longer)
M5 nuts
File info
Scope left.stl scope ring half, bolt head side. Requires 4 nuts and bolts. Scope right.stl scope ring half, nut side. Scope left thin.stl scope ring half, bolt head side. Scope right thin.stl scope ring half, nut side. Scope_normal_together.stl self explanatory. . Requires 4 nuts and bolts. Scope_thin_together.stl self explanatory. Requires 2 nuts and bolts.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30%
Filament: eSun PLA+ Black
Notes:
Print flat side down.
Category: Sport & Outdoors