Kenmore Refrigerator Door Handle Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement bracket for the door handle on Kenmore refrigerators, model # 106.70213910.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you found this, you probably have the same problem I did… The OEM bracket is poorly designed to withstand day-to-day forces over a long time. The first time I replaced the bracket at the cost of $90, because Sears will only sell it with the machined stainless steel handle. When it broke again, I refused and just took the door handle off for a while. Since this didn't sit well with my partner I leveraged it as an excuse to get into 3D printing!
My replacement bracket was modeled with OnShape and prints wonderfully in only a few hours. I added additional material to the main block for additional strength.
I hope this saves you some money!
Print Settings
Printer:
Prusa MK3S+
Supports:
Painted on for the two main screw mounts.
Resolution:
Printed at 0.2mm height with 0.4mm nozzle
Infill:
30%
Notes:
I printed with 3 exterior walls just for additional strength. PLA+ Grey matches pretty close to the OEM color so I didn't do any finishing.