1 / 1
Monitor Stand with Drawers — zdjęcie 1

Monitor Stand with Drawers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Monitor stand built to withstand the weight of most monitors.

Ocena
0 / 5
Polubienia
39
Pobrania
232
Wydruki
0
Wyświetlenia
1771
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

Designed this stand to hold most monitors. I have a standing desk riser that lifts my monitors when sitting and needed something to keep my third monitor at the same height. Also works by itself for monitor stands that cannot raise or lower.

Printed base on its backside so supports were not needed. If you change the build plate adhesion type to none, this will print on a standard Ender 3 V2 Build plate. 

All black parts were printed in Sunlu Black PLA

All blue parts were printed in Overture Silk Blue PLA

The separately printed knobs were an afterthought once I realized my original design for the drawers would not fit my printbed. Knobs were printed and adhered with double-sided tape, but the design from loidolt has predesigned screw holes for easy mounting. (Twisted Cabinet Knob by loidolt | Download free STL model | Printables.com) 

Tagi