Pegboard Desk Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desk mountable pegboard mounts for when mounting on a wall is not a great option. Great for mounting whiteboards, too.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 1094
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I developed these mounts so that I could mount both a whiteboard and pegboard to the back of my “Maker Station” that sits in my office. I recommend printing this in PETG for the added strength. The top and bottom pieces should have tight tolerances that do not require glue, but I am sure this will vary from printer to printer.
Each of the mounts support using M5-0.8 Hex Nuts with fit inside the mounts for the nuts to sit comfortably. Using small washer and a M5-0.8x25-35mm bolts screws should work perfectly for mounting boards.
Feel free to tinker: https://www.tinkercad.com/things/8gAjyRLbWqN-pegboard-mounts
Print instructions
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes, supports are necessary for the connection points for the mounts.
Resolution: 0.20
Infill: 15-20%