Contemporary Dice Tower & Compact Storage Solution
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dice tower that also stores your dice and a standard sized mini.
- Ocena
- 5 / 5
- Polubienia
- 145
- Pobrania
- 465
- Wydruki
- 1
- Wyświetlenia
- 3578
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial
I've designed a dice tower that also doubles as storage for your dice and a single mini, perfect for Dungeons and Dragons and other tabletop RPGs. I've built in a knurled ring around the bottom to easily rotate the inner tower to expose the opening/exit to the tower, the mini storage compartment, or seal up the box.
Print Settings
STLs are oriented in the optimal way for printing. I printed in PLA with .2mm layer height, 20% infill, and 3 perimeters.
Depending on the cooling capabilities of your printer, this model should be printable without supports. If you're having trouble, consider using paint on supports in prusa slicer to address the problem areas (and minimize material waste and post processing time).
Optionally, you can glue in 4x 6mmx3mm neodymium magnets to help keep the tower from sliding out of the sleeve while transporting it.