Raspberry PI 4 Sleeve case with vents
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sleeve casing for a Raspberry Pi 4, now with 300% more vents!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a remix of one of the nicest RP4 casings I found. I was not satisfied by other clamshell designs and some where not as slick as they could be. I tried to improve this one to keep it as clean as possible while vastly increasing the airflow of the original design. No screws necessary, the case is friction fit to the RP4 board.
The short side comes in 2 versions, one with a hole for a 6mm power button, the other without.
As the original designer, i uploaded the STEP file to help others that would want to remix it.
Printed at .2 with 3 perimeters. Oriented on the ends of the sleeves