1 / 1
Filament rack (698Z bearings)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple filament rack using 698Z bearings.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 194
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple filament rack using 698Z bearings instead of the more common 608Z skate bearings. Just in case people only had immediate access to 698Z bearings.
Print 4 to make a set and push fit 4 bearings (it's a tight fit, you may need a vice).