Infant pull up bar UPDATED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 1. After using for a while the dowel rotated to freely. Added two pegs on bracket and jig to drill dowel.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 1. After using for a while the dowel rotated to freely. Added two pegs on bracket and jig to drill dowel.
Update 2. Added lower removable bar for easy pullup from sitting on the ground. I used a metel pipe I had laying around but a 3/8" Dowel should do the trick.
Working from home now and my 7 month old is just learning to stand and needs a bit of assistance. Designed these brackets in Fusion to work with a 1.25" (32mm) dowel rod. Enjoy. Let me know what you think.
Thanks
Print instructions
I printed these pretty heavy duty. 4 wall all the way around 20% infill. 0.2 layer height .6 nozzle.