Wall Mount for Galaxy Tab A 10.1 (2019)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my Galaxy Tab A 10.1 2019 wall mount. I is designt for printing with a SLA LCD Printer. I did print it with…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 1078
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
This is my Galaxy Tab A 10.1 2019 wall mount. I is designt for printing with a SLA LCD Printer. I did print it with Kudo3D Bean.
You also will need 6x 5 mm screws to mount them on the wall. You need to adjust the space between the parts an mark were to screw them in. The holder is desiged to easiely slide the tablet in an out and give it a good hold while on the wall.
Print Settings
Printer:
Bean
Rafts:
No
Supports:
No
Resolution:
0.05
Notes:
If you print this with an FDM printer you will probalby need to add some support or print it on the side standing up.
Category: Tablet