Modix Big 60 Primary Fan Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket replaces the aluminum hotend fan mount bracket on a Modix Big 60. NOTE: USE AT YOUR OWN RISK. The…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This bracket replaces the aluminum hotend fan mount bracket on a Modix Big 60.
NOTE: USE AT YOUR OWN RISK. The original bracket is aluminum, and when you crash the print head, the bracket bends but stays attached. This bracket will snap off, and the fan will be left dangling by the cord, which will most likely cause it to get snagged and ripped off. I'm currently thinking about a version that attached a piece of wire (e.g. paper clip) between the upper arm and the fan portion, so that if it were to break it would stay attached.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.30mm
Infill:
90%
Filament: eSun PETG Silver
Category: 3D Printer Parts