Ecomline cover base of clamp R
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ecomline cover base of clamp R When doing maintenance on my Nefit Ecomline Gas heating the the quick clamp broke on…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 126
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Ecomline cover base of clamp R
When doing maintenance on my Nefit Ecomline Gas heating the the quick clamp broke on the base. This is either caused by my unexperienced use or the fact that after 20 years the material gets more brittle. Anyway, the cover did not close properly with 3 clamps. So I designed my own and printed.
Printed in PETG, 100% infill.
Beware the print has to be vertical in order to make the bending part strong.
If you have some technical understanding and know how to print you will understand ;-)
Please like, subscribe and return your comments.
Feel free to donate, thank you.
Category: DIY