Mini car Škoda 120 - printe in place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Škoda 120 miniature car printed in one piece including rotating wheels.
- Ocena
- 5 / 5
- Polubienia
- 91
- Pobrania
- 785
- Wydruki
- 9
- Wyświetlenia
- 2982
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
[ENG]
Škoda 742 is the collective name for a series of lower-middle class passenger cars produced by the Czechoslovak car manufacturer AZNP between 1976 and 1990. The commercial designations of the cars are Škoda 105, Škoda 120, Škoda 125, Škoda 130 - they differ mainly in engine and equipment level. A derivative type is the Škoda 746, produced in 1987-90 under the trade name Škoda 135, Škoda 136.
In 1983, a modernisation and facelift was introduced. In less than 14 years of series production, more than two million four-door sedans were built at the AZNP Mladá Boleslav and AZNP Vrchlabí plants, while less than 45,000 coupes were built at the AZNP Kvasiny and BAZ Bratislava plants. Even in 2002, twelve years after the end of production, they were the most numerous type of passenger car on Czech roads according to the statistics of registered cars.
This model is designed to be printed sideways on a pad. When printing, due to the sharper overhangs, it is advisable to have good cooling and print with a lower layer height. The model is detailed enough to print at 200% magnification (includes cabin equipment including dashboard steering wheel and seats). When removing the print from the mat, I recommend waiting for the print to cool completely to avoid breaking off the wheels.
ATTENTION, the model contains small parts, so it is not suitable for small children.
More toys printed in one piece:
Truck - tanker - https://www.printables.com/cs/model/255294
Little Bobcat - https://www.printables.com/cs/model/236978
Small tractor - https://www.printables.com/cs/model/233171
RM-70 Vampire 4D - https://www.printables.com/cs/model/210683
Flexi excavator - https://www.printables.com/cs/model/233416
Tatra 813 KOLOS - https://www.printables.com/cs/model/204992
Small truck - https://www.printables.com/cs/model/203724
Little beton mixer truck - https://www.printables.com/cs/model/86386
Small car - https://www.printables.com/cs/model/85918
Small van - https://www.printables.com/cs/model/85917
[CZ]
Škoda 742 je souhrnné označení pro řadu osobních automobilů nižší střední střídy, které vyráběla československá automobilka AZNP v letech 1976 – 1990. Obchodní označení vozů je Škoda 105, Škoda 120, Škoda 125, Škoda 130 – liší se především motorem a úrovní výbavy. Odvozeným typem je Škoda 746, vyráběná v letech 1987–90 pod obchodním označením Škoda 135, Škoda 136.
Roku 1983 přišla modernizace a facelift. Za necelých 14 let sériové výroby byly v závodech AZNP Mladá Boleslav a AZNP Vrchlabí postaveny více než dva miliony čtyřdveřových sedanů, v závodech AZNP Kvasiny a BAZ Bratislava vzniklo necelých 45 tisíc vozů kupé. Ještě v roce 2002, tedy dvanáct let po ukončení výroby, byly podle statistik registrovaných vozů nejpočetněji zastoupeným typem osobního automobilu na českých silnicích.
Tento model je navržen pro tisk v najednou položený bokem na podložce. Při tisku je kvůli ostřejším převisům vhodné mít kvalitní chlazení a tisknout s nižší výškou vrstvy. Model je dostatečně detailní i pro tisk na 200% zvětšení (obsahuje i vybavení kabiny včetně volantu přístrojové desky a sedadel). Při sundávání výtisku z podložky doporučuji počkat na úplné vychladnutí ať nedojde k odlomení kol.