Simple configurable and stackable hose mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are simple models to attach hoses to the wall.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 104
- Wydruki
- 2
- Wyświetlenia
- 393
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
These are simple models to attach hoses to the wall.
Not only for hoses of course :)
There are two versions:
- Permanent clamp on mount.
- Push in mount.
You can easily stack them on the build plate to make mount for multiple parallel hoses, or stack them on top for more mounting holes and stronger clamp.
I'm providing two basic sizes for 30mm and 16 mm hose but standards are different around the world so here is onshape link where you can easily configure/update/improve them for perfect fit.
https://cad.onshape.com/documents/b34b8cc677d11367acd1498e/w/ac712db5e8e0be18d108c8db/e/c06cd1f9b71317ad2a54837f?renderMode=0&uiState=631210c4ab287e79385857bb
Use variables at the top of feature history for basic configuration.
Enjoy ;)