Medical Alert Bracelet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Generic Medical Alert Bracelet
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 756
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Men
- Licencja
- Creative Commons — Attribution
Generic Medical Alert Braclet. Although does not specify condition, it alerts EMTs and other medical personnel there is a condition they need to further investigate.
First layer adhesion is critical as there are 80+ individual parts. If any one (1) does not adhere, you need to stop the print, add glue to plate and/or decrease the first layer by 0.025 to 0.0.50 and try again.
Use paint on support for the female clasp part, but nowhere else. Do not use brin. Printed with 0.40 nozzle at 0.2 layer height. Use layer height modifier to change to 0.10 at 5.20 mm. 15% infill works well.
Used Fusion360 to design Face Plate. Used NetFabb2023 to separate single link from the Tie Maker by ItsaMeWolf (183681). Also used NetFabb2023 to redsign & resize Magnetic Bracelet Clasp by JAYSODUDE (201673). Used NetFabb2023 Boolean feature to join all the parts together. Downloaded Medical Alert and add to top of Face Plate (had to redesign and resize.)
Used boolean feature one at time and did repair script& repair. as needed ) before boolean.
Saved frequently.