BinderClipPostItCleanSign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this out of spite for a dishwasher "clean" indicator sign.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is scaled down from the phone stand, and I created a base for 4 8x3mm magnets, countersunk for a M2x16 socket cap or button head screw to assemble it. I put a support/screw tower in the center of the clamp.
You could do a layer color change after printing the bottom clip before the clamp prints, and I would use supports for it.
The clamp/tower/base and post-it have a hole for the screw all aligned.
Uploaded a new base with 8.9mm holes in the model, because 8.5mm holes in another model measured 7.75mm and my 8.1mm magnets didn't fit.
Uploaded a new post-it note STL because I didn't lay it flat when I exported.
Please let me know if you run into issues with it.