Chevy LS3 Engine Twin Turbo Set-Up
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mash-up of different parts, a couple remixes and my own creation.
- Ocena
- 0 / 5
- Polubienia
- 116
- Pobrania
- 539
- Wydruki
- 3
- Wyświetlenia
- 5640
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Wanted so bad to have a mocked up Twin Turbo LS3. :)
Remix of the Manifolds to add the Wastegate https://www.thingiverse.com/thing:4787340
Remix of the Outlet Pipe and Clamps https://www.thingiverse.com/thing:4633524
Remix of the Engine Stand https://www.thingiverse.com/thing:4034646
All other parts made by me except for obvi the ---
- Engine Block https://www.thingiverse.com/thing:1911808/files
- Heads https://www.thingiverse.com/thing:1911808/files
- Turbo https://www.thingiverse.com/thing:4633524
- Air Filter https://www.thingiverse.com/thing:4633524
- Intake Manifold https://www.thingiverse.com/thing:3865519
- Engine Rotating Stand https://www.thingiverse.com/thing:2343042
Printed all “Hoses” in BLACK TPU for realistic look and function
Mirrored parts are ---
- LS3 Exhaust Outlet Pipe
- LS3 Exhaust WG Tube
- Turbo Exhaust Housing
- Turbo Snail Housing
Wastegate and Blow-Off Valves are a tricky print. Hopefully your printer is setup correct and good luck :)
P.S.- Due to the weight of the components on the exhaust manifolds the magnets will not hold by themselves. There is a single hole in the center of the manifold flange. It lines up with a hole in the cylinder head. I added a 2mm brass threaded insert with my soldering iron. You then can add a 2mmx8mm socket head screw with flat washer to hold the assembly. Works well :)