PIR - MQTT ESP multi / motion sensor / LED Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a motion detection and multisensor device I've created.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 1334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a motion detection and multisensor device I've created. Built with an ESP8266, DHT22, Lightresristor and a PIR Module. It use MQTT to transmit the values.
To assemble the motion Sensor you need the 3d parts and the PCB board. The board is the PCB.SVG file.
For the Adafruit LED Ring you need
- pir-gehaeuse-deckel.stl
- pir-gehaeuse-deckel-blendring.stl
When you have a other (cheap) LED Ring then you need
- pir-gehaeuse-deckel45mm.stl
- pir-gehaeuse-deckel-blend45mm.stl
The other parts are the same.
I wrote a tutorial on my website. Only in German but the translation should be very easy. A shopping list and the assembly guide is there described too
https://blue-pc.net/2019/05/06/blue-pir-mqtt-bewegunsmelder/
and a explosion drawing on Youtube
The source code is on github:
https://github.com/jkarsten/Blue-PIR-MQTT-Multisensor