1 / 1
Optimized Tramming (Bed Leveling)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spiral bed tramming model that is minimal and easy to remove.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
Features
- Spiral Pattern: Lets you check your level twice!
- Easy to remove: You can pull off the entire print by just lifting one corner!
How It Works
- Starts printing from the outside, advancing towards the center. Adjust your bed during this time.
- Once it reaches the center, it starts printing towards outside again, letting you check how you did your tramming.
- It then prints a second layer, because if your nozzle was to close to bed during the first layer that plastic is gonna be stuck to the bed and impossible to remove without the second layer.
- Third layer connects the entire print together so that you can easily remove it.