Filameter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Filameter is a measuring device to measure the amount of Filament that is left on a Spool.
- Ocena
- 4,5 / 5
- Polubienia
- 16
- Pobrania
- 69
- Wydruki
- 4
- Wyświetlenia
- 853
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
With the Filameter, you can not only see how your filament locks like when it's printed, you can also measure the amount of filament that's left on a Spool.
The Numbers that are written on the Filameter are the number of Meters that are left on the Spool.
Just print 1 for every Spoon you want to take measure from an clip it on the side of it using the polygon holes on the Spool.
There are 2 Versions of the Filameter depending on what kind of Spool you have, a Spool with or a Spool without Polygon Pattern.
Adjustment:
To adjust the Filameter, make sure you're using the 3 highlighted Polygons on the 3te picture.
For Printing:
Turn the model so that the Polygons are facing upwards.
- 0.4 mm Nozzel
- 0.2 mm Layers
- 15% Infill