Dishwasher Strainer for GE Dishwasher aka Chopstick Saver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grid to prevent skinny utensils, ie Chopsticks from falling through utensil basket.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 1009
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is meant so that you can wish utensils with a thin stem such as Chopsticks, Spoons, Forks, etc in the dishwasher basket without them falling through.
IMPORTANT: The models are solid. In order for this to come out in the photos you need to slice it specially.
This is designed for a GE Dishwasher Basket. I'm not sure how standard/generic these baskets are (or not)
Set Top and Bottom Layers to Zero
Set Infill to your choice - I used Honeycomb - and set to your desired density. In these pictures I believe I used 15%
Print in the highest temperature filament you have. PLA is a no go, will immediately melt/warp first cycle. PETG survives for a few months, so I just reprint every few months.
Recommend Scaling up in Z for a thicker strainer, if using PETG (It helps it to not warp as soon). Try 3-5mm.