Tilting Base for Revopoint Pop2/Mini Turntable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was inspired by the Revopoint automatic dual-axis turntable, and designed this manual one. The separate ring is for…
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 176
- Wydruki
- 0
- Wyświetlenia
- 1317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I was inspired by the Revopoint automatic dual-axis turntable, and designed this manual one.
The separate ring is for easy printing and eliminates the need for support.
The base and dome do not require much infill - I used 4%. For smoothness of the inside of the base and the dome, I suggest using up to 0.15mm layer height.
To increase friction between the dome and the base, I added some masking tape as shown in the pictures.
For long-term use, I suggest super-glueing the ring to the dome.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.15mm
Infill:
4%
Notes:
Obviously, flip the ring and dome for printing without support.
Custom Section
Category: DIY