Airbrush Compressor 120mm Fan Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Airbrush Compressor fan bracket to attach a 120mm fan
- Ocena
- 4 / 5
- Polubienia
- 59
- Pobrania
- 230
- Wydruki
- 3
- Wyświetlenia
- 2122
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this fan bracket to attach a 120mm fan, that I took from an old PC case, to my Fendga airbrush air compressor. This will help to keep the air compressor cool when running; especially useful for compressors without a tank.
I printed this using PETG so it would have a bit more heat resistance but PLA should work fine. No screws are required for this bracket as it slots over the existing bolt heads. I used 4x cable ties to secure the fan, but you could use bolts and nuts if you want. Only downside is you won't be able to use the carrying handle.
To power the PC fan I took an old 12v power adapter and soldered the connectors to the fan wires. There are plenty of online tutorials to help with this if you are unsure.