1 / 2
Wall mount for Makita dual battery charger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounting brackets for the DC18RD Makita battery charger.
- Ocena
- 5 / 5
- Polubienia
- 127
- Pobrania
- 1248
- Wydruki
- 18
- Wyświetlenia
- 4433
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 18) (Komentarze: 24)Remiksy (0)Kolekcje (232)Powiązane
Brackets to hold the Makita dual battery charger to the wall.
Print two of the lower brackets and one of the upper. Screw the two lower brackets into the wall, place the charger on them, and screw the upper bracket into place to hold it.
Print settings (with 0.6mm nozzle, but something similar should be fine for 0.4):
- “0.30mm Quality” profile as base
- 4 perimeters
- Printed lying down
- For the ‘Lower’ bracket I added supports with the style set to “snug” to only have supports between the arms - see attached image.