Runout Sensor Mount for JG Maker Artist-D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Saw lots of complaints about the drag from the stock runout sensors, which are in an awkward position. Also saw where…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Saw lots of complaints about the drag from the stock runout sensors, which are in an awkward position. Also saw where relocating the sensor helped with drag. So I created a mount for the late model Pro (without the 4020 aluminum beam across the top) that have a plastic cap at the top.
Also added an experimental 4020 version. Let me know if it works.
Do we need a longer version (further forward)?
This mount can sit across the top until you find the best spot, then you can anchor it with a sheet metal screw or drill a hole and use a M3 screw.
Update 6/17/2021: Uploaded tall versions of both mounts with more 15 mm more projection.
Update 8/25/2021: Uploaded tall & long versions of both mounts with 10 mm more projection.
Parts: I use these everywhere. You can create an extension wire for your runout sensor: 2PIN Female and Male Connection Plugs on Amazon
Print Settings
Printer:
JGMaker Artist-D Pro
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament:
eSun PLA or PETG
Purple
Notes:
Use 4 outer layers for strength and at least 20% infill
Category: 3D Printer Accessories