Mosfet Mount for JGMaker Artist-D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mosfet holder for the JGMaker Artist-D or Artist-D Pro printer. You'll need 3 mosfet boards (4.5 cm x 7 cm)…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a mosfet holder for the JGMaker Artist-D or Artist-D Pro printer. You'll need 3 mosfet boards (4.5 cm x 7 cm) and screws to secure them. The boards I've linked to below come in 2 packs. Possibly other brands may work as well.
The 5 cm x 6 cm mount is untested, but should work. Worst case the mosfet screw holes are a little off.
Check the amperage of the board you choose. 30 amp boards handle twice as much current as 15 amp.
Source files included.
Like my work? Post a make!
Links:
45x70 board: ACEIRMC 2pcs 30A Mos Tube Heat Bed Power Module Expansion Board
50x60 board: Heat Bed Mosfet, MACTISICAL 2 Pack - 25 amp
Print Settings
Printer:
JGMaker Artist-D Pro
Rafts:
No
Supports:
No
Resolution:
200
Infill:
30%
Filament:
eSun PLA+, PETG, is preferred.
Purple.
Notes:
Use 4 outer layers for strength. Shouldn't need more than 30% infill
Category: 3D Printer Accessories