CUBE.orig 3 Equal Part Puzzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 equal part puzzle cube. math art.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 63
- Wydruki
- 2
- Wyświetlenia
- 351
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
If you have not printed yet, use the -2 versions. Not a lot of difference and your slicer may make it a non-issue anyway.
You should print in the position the .stl files are already oriented. I used .15mm layers, 2 side layers, 3 top and bottom layers, 15% infill. No rafts, no support. I used Prusament PLA.
Generally I always use the Prusa Slicr, but in this case I used S3D. (I have not been using S3D for a long time, but found it occasionally works faster for some things; not necessarily better.)
You can triple up on your plate three times using three colors and you will end up with parts for three multi-color assemblies. UPDATE: I have found that I get better results, less bridging--smoother inner surfaces, just printing one piece at a time. Maybe it's just me. Try both ways and see if you get better results with one or the other.