TFT32 Display Mount for Creality Ender 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
TFT32 display mount for creality ender 3
mount your tft32 on the right side of your ender 3 to replace the stock display or mount it on the left side as an additioinal input/display device.
Required: 4x M3x5 screws
Optional: cable clips for the serial port cable
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
not required
Filament:generic PLA black
Notes:
You may need to fiddle around with your slicer settings to avoid short zigzag patterns if you choose to use infill.
Just use 3 perimeters with no infill and you should be fine.
How I Designed This
I used freecad 0.18.3 for this design and rounded the corners where possible to improve print quality and print speed