Apple TV Remote AirTag Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sleek form case with an AirTag holder for the Apple TV/ Apple TV 4K remote control (the one with the black front).
- Ocena
- 4,909 / 5
- Polubienia
- 104
- Pobrania
- 808
- Wydruki
- 14
- Wyświetlenia
- 3975
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is essentially a slight remix of the ‘Original Siri Remote Holder with AirTag’ by makanadumlao on Thingiverse: https://www.thingiverse.com/thing:4851515. I removed the lanyard holes and made it slightly more ‘no support’ friendly.
I love the fit and feel of this case and I use the added AirTag functionality daily because my kids can never remember where they left the remote!!
While you should be able to get away with no supports, I did use them for the top part (front or nose of the case where the hole for the IR sensor is located) to ensure a proper fit and at the base where the case is rounded, in leu of a brim. My Prusa Mini+ does do pretty well bridging with PLA, so I likely didn’t need the supports.
- Print upright as laid out in the stl file and shown in the photos
- Use a brim if you aren’t using supports at the bottom and you print fast ;)
- PLA or PLA+
- .20 layer height (although .15 may have a slightly smoother feel)
- 10% infill is sufficient