Infill Swatch

This is a remix of my original Filament Color Swatch that has been modified to showcase the different infill types available in Prusa Slicer. The goal here was to keep the same form factor as the original file (38 × 40 × 3 mm) while using the existing recess as a "window" into an infill type. The size of the recess had to be modified a bit for the text to be readable and the keyring opening had to be removed but the final model ended up working quite well with my collection of existing filament swatches.

I have also made a text-less version of this infill library that retains the original keyring opening and made it available as a remix under the Filament Infill Keychain model.

Printing

I would suggest using one the included Prusa Slicer configuration file to print this project and just select the model you wish to print and your own preferred filament profile as this project relies heavily on modifiers setup directly in Prusa Slicer.

Three slicer project file are available:

• a simple one called sample-tag-infill.3mf containing all models and infill types (as well as the blank model, which can be configured to use any infill you want if you prefer a print without text)
• sample-tag-infill-colorchanger.3mf pre-configured with two filament changes at 2.60 mm and 2.80 mm if you wish to use another color as the text background

Here are the configured and recommended print settings:

• Layer Height: 0.2mm
• Infill: 100% (infill type and density should be configured per model)
• Raft / Supports / Brim: no
• Seam position: Aligned (recommended)
• Infill print speed: 45mm/s (recommended)

If you wish to setup your own slicer configuration instead of modifying the original one, make sure to load the sample-modifier-infill.stl file as a modifier for the model selected to achieve the best results. You should then make sure to use this modifier to set the number of solid top layers to 0, solid bottom layers to 2 and to select your infill type and density amount.