Roomba under-table barrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bumper panels to attach to the underside of a table to prevent a robotic vacuum from moving past them.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
My tables are just high enough for my roomba to fit underneath. I actually want them to be vacuumed under, but the table with my stereo equipment has many tasty cords behind it. After my i3 ate my cords for the second time, I decided to make an under-table barrier.
These attach to the underside of a wooden table via wood screws and a washer. By default, the holes are 1mm just as pilot holes, and you can drill them out further depending on the size of wood screw you have laying around.
Prints well using petg, 0.3mm layer height, default 20% infill.