Standalone CR10-V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I love to take my printers to show off, so, I made my CR10 V3 more portable.
- Ocena
- 0 / 5
- Polubienia
- 56
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 2696
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
So, I have to move my printers when I do metal working otherwise, I have to clean metal dust off of them. My shop is small and have limited workspace. I wanted the challenge of working within the scope of the original design (no foot mod). you will need to get longer power cables and screen cables. also, a SD card extender, no, I did not include a SD card extender there are too many different extenders to do that. I also made sure that they fit on an Prusa mk3 or even, what I used for the case, a Elegoo Saturn. The screen is part of my metal working experience, so maybe use screen off thing:2841111, or get into metalworking!
on a separate note, don't use cable chains on cable not rated for flexing. Instead use a spring and some zip ties to keep it up out of the way.