Magsafe Joycon Gaming Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use your Joycons with any iPhone 12, 13 or 14 (Not Max Models) through Magsafe and Bluetooth!
- Ocena
- 5 / 5
- Polubienia
- 131
- Pobrania
- 1045
- Wydruki
- 5
- Wyświetlenia
- 9299
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Check out my project portfolio! https://www.everyview.net/magsafe-gaming-grip
You need to order magsafe magnets to make this all work together. You can order them on amazon or wherever you can find them, but if you want to use my amazon affiliate link you can use this https://amzn.to/3Qco9QV
The cavity for the magnets were made for a thicker magnet than normally sold online, so you might want to fill it in with something or try to stack couple magsafe magnets for a good fit.
I personally put a sticker on top of the magnets so it stays in, but superglue should work too.
I recommend using support so the railings print and work properly and you should also try to sand it down for a smoother mechanism.
I printed my model separately to prevent lifting, but the model included is the full size so split if you see fit.
This project requires little assembly so hope you enjoy!