1 / 9
Stove knob
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stoves seem to have the bad habit of loosing their knobs ;) Some days ago I noticed that my favorite restaurant's…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Stoves seem to have the bad habit of loosing their knobs ;) Some days ago I noticed that my favorite restaurant's stove was missing two knobs. I therefore offered to help out and print two new ones on my MakerBot Thing-O-Matic. It was fun to model and 3D print it. I also got a free meal! ;)
- The knob is made to fit a shaft of 6 mm in diameter.
- The design incorporates a 6 mm set-screw to stop the knob from spinning
Instructions
- Download the STL
- 3D print it
- Use a M6 thread tap to thread the 4.5 mm hole
- Insert the set-screw
- Fit the knob to the stove
- Tighten the set-screw carefully
Done! :)
Category: Other