Anycubic Mega-S Hotend LED Cover Fan Duct Half-Circle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Complete Hotend Cover including half-circle print cooling and a mount for a LED strip. Fits the original Anycubic…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 965
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Complete Hotend Cover including half-circle print cooling and a mount for a LED strip.
Fits the original Anycubic "BOOSFAN JD4512M12" and any 40 x 10 mm fan for extruder cooling, in my case the Noctua NF-A4x10 FLX.
Noctua NF-A4x10 FLX (12V, not 5V!)* Amazon DE: https://www.amazon.de/gp/product/B009NQLT0M/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=smashdde-21&linkId=2767b7d411f74c6f72211d7975ca37ba&language=de_DE Amazon UK: https://www.amazon.de/gp/product/B009NQLT0M/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=smashdde-21&linkId=2767b7d411f74c6f72211d7975ca37ba&language=de_DE Amazon US: https://www.amazon.de/gp/product/B009NQLT0M/ref=as_li_ss_tl?ie=UTF8&linkCode=sl1&tag=smashdde-21&linkId=2767b7d411f74c6f72211d7975ca37ba&language=de_DE
Yes, it is a little bit expensive, but quiet and has a MTBF of 150.000+ hours, max. 17.9 dB(A).
*The used link is a so-called affiliate one. When you buy the product using this link, I will receive a small provision. The price itself does not change. Thanks for your support :)
Btw: I have printed it with PLA, but added enough structure to prevent bending of the fan duct. Without them the right lower fan duct part began to drop down, but with the reinforcements it works well. Hopefully lasts.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.15 - 0.2
Infill:
20
Filament: Redline PLA with non-abrasive aluminium
Eisengrau Glitzer
Notes:
Use supports from build-plate, block unwanted support if you get some ...
Category: 3D Printer Parts