Cut template for Prusa Covid19 shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
two templates to mark the cut lines for the lower and upper side of the Prusa shield.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 164
- Wydruki
- 0
- Wyświetlenia
- 810
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
two templates to mark the cut lines for the lower and upper side of the Prusa shield.
Two separate files, because the whole shield size (240x240) does not fit on the build plate. Especially the curves are difficult to make perfect without laser/cnc cutter, so a template is in place.
Both templates have a 45 degrees angle on the inside perimeter, to make it more clear that the cut needs to be performed on the OUTSIDE perimeter.
Use a sharpie or equivalent to mark the cuts, don't forget the holes!
Print instructions
Print at any resolution/infill. It does not have to be beautiful, only functional. attached Gcode is at 0.20 and 40% infill (PETG).
In the user files I also added a 0.30 and 20% infill file, this saves some time.