Bambu Lab X1C Clog Pusher Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of Bounet X1 clog pusher with a ptfe tube.
- Ocena
- 4,778 / 5
- Polubienia
- 350
- Pobrania
- 1164
- Wydruki
- 23
- Wyświetlenia
- 10 913
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I like the design of Bounet's clog pusher. I wanted to include a ptfe tube within to help guide the filament when doing a cold pull to clear out the clog. I designed 2 versions to have the 2 screws secured by either nuts or brass inserts.
if you are using brass insets, you will need 2 pcs of M3xD4.6XL3
For the brass insert version, insert it carefully as it can distort the wall making the print head fit difficult.
Print in petg, abs or any high temp filament.
thank you Bounet for sharing this wonderful design.
If you like my designs and want to contribute to my coffee addiction, a donation of $2 to Ko-fi or paypal.me will be greatly appreciated.
Caveat
As with all my designs, it may and may not work for you. So print and install at your own discretion.