1 / 4
Victorinox Fibrox Paring Knife Block - Knife Holder — zdjęcie 1
1 / 4

Victorinox Fibrox Paring Knife Block - Knife Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A compact, countertop knife block to hold your Victorinox 3.25" paring knives

Ocena
0 / 5
Polubienia
15
Pobrania
131
Wydruki
0
Wyświetlenia
867
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a compact countertop knife block to keep your Victorinox Fibrox 3.25" paring knvies organized.  These are fantastic little knives, they are easily sharpened, take a keen edge, dishwasher safe and are dirt cheap to replace if you damage one.  A go-to in our kitchen, easily our most frequently used knives.  This block is designed with a 10 degree forward cant to make the knives more easily accessible.  

Print this model with the knife slot openings face down on the print bed.  No supports required since the slots are so small.  Printing with slots down will give the best finish for the visible face of the knife block.  I printed this in Hatchbox Stone PLA.  The included gcode file is set to print at 0.2mm and has a layer height modifier to change from 5% infill to something heavier (50%?) near the base to make it more bottom heavy for added stability.  It will print much faster at 0.3mm or with Variable Layer Height enabled, if you want to re-slice.

Tagi