Weller soldering station case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for a Weller WES51 and accessories. Latches are from https://www.thingiverse.com/thing:4582978/files…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 1352
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a case for a Weller WES51 and accessories.
Latches are from https://www.thingiverse.com/thing:4582978/files and adjusted to fit my design.
Both hinges were printed with heavy walls to make them solid and use M3 x 30 screws for assembly. Assemble the hinge before mounting it to the box. Now, the hinge is mounted to the box and lid using M4 screws and nuts.
Infill and walls/bottom/top are up to you.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.5
Infill:
30%
Filament: Generic PLA/ABS Varied
Notes:
Latches were connected using M3 30mm long screws.
Category: Tool Holders & Boxes
